FD-411 Pneunatic And High-Pressure Polyurethane Spray Machine

Product Detail

FD-411 pneunatic and high-pressure polyurethane spray machine
Heating principle:
ISO and POLY material heated by the heater, heating pipe insulation, this will ensure that in a very short period of time consistent with the concentration of black and white raw material passage

Booster pump:
Vertical booster pumps, booster pumps two materials move up and down at the same time, pressure is stable.

Shutdown reset function:
There shutdown reset function, when the equipment is shut down black feed booster pump shaft completely immersed in a preservative solution to prevent crystallization of the black material damage to the shaft seal assembly

Equipment, Parts Quality Control:
All in accordance with the design requirements of the device materials procurement, many materials are imported materials, in addition to processing operator self-inspection, mutual inspection, the special quality inspection departments and the first inspection for each processing sectors, each equipment must be assembled later after a long period of specialized equipment to test the performance, the indicators tested after packaging to storage;

Guarantee and after-sale service
1. 18 months guarantee for whole machine except artificial damage.
2. 24 hours technical support by e-mail, skype or telephone.
3. Use-friendly English manual and videos.

Standard Technical Parameters

The ratio of raw material 1:1	Max heating hose length 75m
Max working pressure 23Mpa	Heating hose max power 3500W
Max fluid temperature 80ºC	Voltage 220V/380V
Max output 10kg/min	Clean mode Self-clean by air
Heater power 3000W×2	Pneumatic source 0.5-0.9Mpa 1m³/min




Standard Configuration

Mainframe 1 set	Self-cleaning spray gun 1 set
Transfer pump 2 sets	Heating hose 15m
Transfer pump hose 2.5m	Gun hose 1.5m
Spare parts and Tools 1 set	English user manual 1 set




Shipping Parameters

Body size (L×W×H)820×900×1120mm

Packing size (L×W×H) 400×560×1440mm

Gross weight 200kg